Blog - Sanatkumāra uvāca

Greg Kelly Greg Kelly

0 Course Enrolled • 0 Course Completed

Biography

Fire-Inspector-II Authorized Test Dumps, Fire-Inspector-II Reliable Dumps Questions

2026 Latest Lead2Passed Fire-Inspector-II PDF Dumps and Fire-Inspector-II Exam Engine Free Share: https://drive.google.com/open?id=1upaHqd_gTUT3k_EjJW96yv0n4GjgVHv5

If you are worrying about that there is no enough time to prepare for Fire-Inspector-II exam, or you can't find the authoritative study materials about Fire-Inspector-II exam, but when you read this article, your worries will be deleted completely. The latest Fire-Inspector-II exam review materials offered by our Lead2Passed will help you complete the Fire-Inspector-II Exam Preparation in short time. We have the authority of the exam materials and experienced team with rich sense of responsibility. All that we have done is just to help you easily pass the Fire-Inspector-II exam.

It is the best choice to accelerate your career by getting qualified by Fire-Inspector-II certification. Lead2Passed provides the most updated and accurate Fire-Inspector-II study pdf for clearing your actual test. The quality of Fire-Inspector-II practice training torrent is checked by our professional experts. The high pass rate and high hit rate of International Code Council pdf vce can ensure you 100% pass in the first attempt. What’s more, if you fail the Fire-Inspector-II test unfortunately, we will give you full refund without any hesitation.

>> Fire-Inspector-II Authorized Test Dumps <<

Fire-Inspector-II Reliable Dumps Questions | Exam Fire-Inspector-II Questions Answers

Lead2Passed is a website specifically provide the certification exam information sources for International Code Council professionals. Through many reflects from people who have purchase Lead2Passed's products, Lead2Passed is proved to be the best website to provide the source of information about Fire-Inspector-II Certification Exam. The product of Fire-Inspector-II is a very reliable training tool for you. The answers of the exam exercises provided by Lead2Passed is very accurate. Our Lead2Passed's senior experts are continuing to enhance the quality of our training materials.

International Code Council 67 - Fire Inspector II Exam Sample Questions (Q56-Q61):

NEW QUESTION # 56
Existing elevators in a four-story office building which are intended for use by emergency personnel for fire- fighting or rescue purposes must comply with which of the following standards?

A. ASME A17.1
B. UL 803
C. NFPA 70
D. ASME A17.3

Answer: A

Explanation:
Reference to Elevator Safety and Firefighter Use:
ASME A17.1 (Safety Code for Elevators and Escalators) establishes the safety requirements for elevators, including those designated for firefighter and emergency personnel use.
The International Fire Code (IFC) and NFPA 101 (Life Safety Code) both reference ASME A17.1 when addressing elevator safety and firefighter access.
Firefighter Access and Operation Requirements:
ASME A17.1, Section 2.27 covers Firefighter Emergency Operations (FEO), which includes:
Phase I Operation (Automatic recall of elevators to a designated floor upon activation of fire alarms).
Phase II Operation (Manual override by firefighters for rescue and suppression operations).
IFC 607.1 (2021 Edition) mandates that fire service access elevators comply with ASME A17.1 for firefighter use in high-rise and multi-story buildings.
Clarification of Incorrect Answer Choices:
A: UL 803 # Incorrect
UL 803 is not related to elevator fire safety; it pertains to electrical control panels for industrial applications.
B: NFPA 70 (National Electrical Code) # Incorrect
While NFPA 70 covers electrical wiring and circuits, it does not specifically regulate elevator emergency operations.
D: ASME A17.3 # Incorrect
ASME A17.3 is the Safety Code for Existing Elevators and Escalators, which applies to retrofits and upgrades, but ASME A17.1 is the primary code for operational and emergency use elevators.
Conclusion:
The correct and verified answer is C (ASME A17.1) because it specifically outlines the requirements for firefighter and emergency personnel elevator use, ensuring compliance with the IFC and NFPA codes.

NEW QUESTION # 57
Flammable medical gas supply cylinders located inside of a building must be stored in a separate room of not less than __ fire-resistive construction when exceeding 200 cu. ft.

A. 1-hour
B. 3-hour
C. 2-hour
D. 1/2-hour

Answer: C

Explanation:
The storage of flammable medical gas supply cylinders inside a building is regulated by 2021 International Fire Code (IFC) Section 5306 - Medical Gas Systems.
IFC Section 5306.2.1 - Storage of More Than 200 Cubic Feet of Medical Gases:
When the quantity of flammable medical gas exceeds 200 cubic feet, it must be stored in a separate room with a minimum 2-hour fire-resistance rating.
The room must also comply with ventilation and explosion control requirements per NFPA 99 (Healthcare Facilities Code).
Why Other Options Are Incorrect?
A: 1/2-hour - Insufficient fire resistance for high-risk gas storage.
B: 1-hour - Does not meet the minimum 2-hour requirement set by the IFC.
D: 3-hour - Exceeds the minimum required by code; the correct requirement is 2-hour fire-resistive construction.

NEW QUESTION # 58
In the fire code, ABS plastics are designated as ___ plastic materials.

A. Commodity Class III
B. Group A
C. Group C
D. Group B

Answer: B

Explanation:
IFC Section 2303.7 classifies ABS (acrylonitrile butadiene styrene) plastics as Group A (high-hazard) due to their flammability and smoke production, per NFPA 13. Options B and C are less hazardous, D is a commodity class, not a plastic group. Thus, A is correct.
Reference: IFC 2021, Section 2303.7, NFPA 13.

NEW QUESTION # 59
The occupant load of a building, or portion thereof, may be increased beyond the code's calculated minimum for the Group classification of the building, provided that all other requirements of the code are also met based on the modified number, and the occupant load does not exceed one occupant per ___ sq. ft.

A. 0
B. 1
C. 2
D. 3

Answer: B

Explanation:
Reference to Occupant Load Calculation:
The International Fire Code (IFC 2021), Section 1004.2 states that the calculated occupant load of a building may be increased if all other life safety provisions are met.
However, the occupant load cannot exceed one person per 5 square feet when increased beyond the standard calculations.
Fire Safety Considerations for Increased Occupant Load:
Increasing the occupant load requires ensuring:
Egress capacity (number and width of exits) meets the increased load.
Fire protection systems (sprinklers, alarms, etc.) are adequate for the new load.
Proper ventilation and sanitation facilities are maintained.
IFC 1004.2 and NFPA 101 both enforce the maximum limit of 1 occupant per 5 square feet in modified occupant load scenarios.
Clarification of Incorrect Answer Choices:
A: 3 sq. ft. # Incorrect
Too small for safe egress and occupant movement; the code does not allow such high density in general occupancies.
C: 7 sq. ft. # Incorrect
While some occupancies have higher space-per-occupant allowances, 5 sq. ft. is the maximum density permitted when increasing load.
D: 15 sq. ft. # Incorrect
15 sq. ft. per person is for lower-density assembly and business occupancies, not for maximum occupant load increases.
Conclusion:
The correct and verified answer is B (5 sq. ft. per occupant) as per IFC 1004.2 and NFPA 101, which govern occupant load increases in buildings.

NEW QUESTION # 60
A bowling center with 25 lanes and 3,500 sq. ft. of additional area calculates to a maximum occupant load of how many people?

A. 0
B. 1
C. 2
D. 3

Answer: D

Explanation:
To determine the maximum occupant load for a bowling center with 25 lanes and 3,500 sq. ft. of additional area, we use the occupant load factor from 2021 IBC Table 1004.5.
Step 1: Calculate the Occupant Load for Bowling Lanes
IBC Table 1004.5 assigns 50 sq. ft. per person for bowling lanes and associated seating areas.
With 25 lanes, assuming 100 sq. ft. per lane (standard industry measurement for lane width and approach area):
25×(10050)=25×2=50 occupants25 imes left( rac{100}{50} ight) = 25 imes 2 = 50 ext{ occupants}
25×(50100)=25×2=50 occupants
Step 2: Calculate the Occupant Load for Additional Area
Additional 3,500 sq. ft. area follows a general occupant load factor of 15 sq. ft. per person (assembly without fixed seats):
3,50015=233.3 occupants#234 (rounded)rac{3,500}{15} = 233.3 ext{ occupants} approx 234 ext{ (rounded)}153,500=233.3 occupants#234 (rounded) Final Calculation:
50+184=234 occupants50 + 184 = 234 ext{ occupants}50+184=234 occupants Reference to Fire Inspector Documentation:
1. 2021 International Building Code (IBC) - Table 1004.5 (Occupant Load Factor) Bowling lanes require 50 sq. ft. per person.
Assembly areas without fixed seats use 15 sq. ft. per person.
2. 2021 International Fire Code (IFC) - Section 1004.1.2 (Areas without Fixed Seating) When calculating occupant load, areas without fixed seating must be divided by the appropriate occupant load factor.
Detailed Explanation of Answer Choices:
Option A (Incorrect): 125 is too low based on correct load factor calculations.
Option B (Correct): 234 is the correct calculation using IBC Table 1004.5.
Option C (Incorrect): 500 is too high based on the available space.
Option D (Incorrect): 625 significantly overestimates the actual occupant load.
Thus, the correct and verified answer is: B. 234.

NEW QUESTION # 61
......

If you want to practice the Fire-Inspector-II exam questions with different eletronic devices. We believe our APP version of Fire-Inspector-II training braindump will be very convenient for you. In addition, the online version of our Fire-Inspector-II training materials can work in an offline state. If you buy our Fire-Inspector-II Study Guide, you have the chance to use our Fire-Inspector-II study materials for preparing your exam when you are in an offline state. We believe that you will like the online version of our Fire-Inspector-II exam questions.

Fire-Inspector-II Reliable Dumps Questions: https://www.lead2passed.com/International-Code-Council/Fire-Inspector-II-practice-exam-dumps.html

Our Fire-Inspector-II study materials boost the self-learning and self-evaluation functions so as to let the clients understand their learning results and learning process , then find the weak links to improve them, With the updated training material, you will be able to prepare for the International Code Council Fire-Inspector-II exam questions and pass it on the first attempt, With the help of ITCertTest's Fire-Inspector-II exam questions and answers, we're sure you can quickly pass your Fire-Inspector-II exam on your first try.

Working with Folders, Required Objective: Connect to the server, Our Fire-Inspector-II study materials boost the self-learning and self-evaluation functions so as to let the clients understand Fire-Inspector-II Exam Simulator Online their learning results and learning process , then find the weak links to improve them.

In-Depth of Questions Fire-Inspector-II valuable resource

With the updated training material, you will be able to prepare for the International Code Council Fire-Inspector-II Exam Questions and pass it on the first attempt, With the help of ITCertTest's Fire-Inspector-II exam questions and answers, we're sure you can quickly pass your Fire-Inspector-II exam on your first try.

Most importantly, the passing rate of our Fire-Inspector-II study materials is as high as 98 % - 99 %, If you worry about the quality of our latest International Code Council 67 - Fire Inspector II Exam latest practice dumps, we Fire-Inspector-II also provide a small part of our complete files as free demo for your reference before buying.

BTW, DOWNLOAD part of Lead2Passed Fire-Inspector-II dumps from Cloud Storage: https://drive.google.com/open?id=1upaHqd_gTUT3k_EjJW96yv0n4GjgVHv5